Lock iconRectangle 1Rectangle 2 + Rectangle 2 CopyShapeRectangle 1
**PLEASE TAKE NOTE** *WITH THE FLUCTUATION IN CURRENCY EXCHANGE DURING THESE TIMES | ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE** *OUR DOORS ARE STILL OPEN|ONLINE ORDERS WILL BE SHIPPED AS OUR COURIERS PERMIT*PLEASE CALL 403-394-2000 TO CONFIRM PRICE AND AVAILABILITY*

RZR XP900 Rear Bumper

EMP 11097

45461635

  • Sale
  • $279


Includes:
1. (1) Rear Bumper
2. (1) Rear Mounting Bracket
3. (2) Side Support Angles (LH & RH)
4. (6) 3/8-16 x 1” Black Carriage Bolt
5. (2) 3/8-16 x 1” Flange Bolt
6. (2) 3/8-16 x 2-1/2” Fully Threaded Bolt.
7. (2) 3/8-16 x 1-1/8” Coupling Nut
8. (10) 3/8” Nylon Nuts
9. (10) 3/8” Flat Washers
10. (1) Logo Sticker


Installation:
1. You will need to ream out the two holes in your RZR to 13/32” diame-ter. These the top holes in the mounting bracket.
2. Insert the (2) long bolts from the front through the holes your reamed out. Fasten the bolts with the 1-1/8” long coupling nuts. Use (2) flat washers on the bolts.
3. Attach the mounting bracket to your RZR. The top of the bracket will attach using (2) 3/8” Nylon nuts.
4. The bottom will attach with the (2) 3/8” Flange Bolts, (2) washers, and (2) Nuts.
5. Attach the bumper to the bracket us-ing (4) Carriage Bolts, (4) washers, and (4) Nuts.
6. Attach the end supports to the under-side of the bumper using (2) Carriage Bolts, (2) Washers, and (2) Nuts. The other end will bolt to your frame using the stock bolts (see picture).